Hubbell-electric-heater-company B Manuel d'utilisateur télécharger pdf (Page 11)

FINAL CHECKS

1. Check all connections for tightness.

2. Ensure that all the above steps are completed

3. After the water is heated for the first time, monitor the water temperature as described in

Section III, Quarterly Inspection.

Outgoing Water (180°F)

!Important!

! Do not install

any valves other than those

shown between the primary

water heater and the booster

heater.

Incoming Water (140°F)

1 – B Model Booster

2 – Dishwasher

3 – Pressure Regulator w/ built-in by-pass

4 – Pressure/Temperature Gauge

5 – Shut-Off Valve

6 – Union

7 – Drain Valve

8 – Pressure and Temperature Relief Valve (pipe overflow to floor drain or sink)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Pas de commentaire

Hubbell-electric-heater-company B Manuel d'utilisateur Page 11